IEI Technology IMBA-G410 User Manual Download Page 3

Page: 3 / 158

2011/8/172011/8/17

IMBA-G410 ATX Motherboard

Page iii

Copyright

COPYRIGHT NOTICE

The information in this document is subject to change without prior notice in order to

improve reliability, design and function and does not represent a commitment on the part

of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or

documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are

reserved. No part of this manual may be reproduced by any mechanical, electronic, or

other means in any form without prior written permission of the manufacturer.

TRADEMARKS

All registered trademarks and product names mentioned herein are used for identification

purposes only and may be trademarks and/or registered trademarks of their respective

owners.

Summary of Contents for IMBA-G410































































































































































Search results

Summary of Contents for IMBA-G410

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-G410, User Manual

Search results

Summary of Contents for IMBA-G410

Reviews:

Brands by name

Popular brands