IEI Technology IMBA-9654 User Manual Download Page 6

Page: 6 / 260

IMBA-9654 ATX Motherboard

Page vi

Packing List

NOTE:

If any of the components listed in the checklist below are missing,

please do not proceed with the installation. Contact the IEI reseller or

vendor you purchased the IMBA-9654 from or contact an IEI sales

representative directly. To contact an IEI sales representative, please

send an email to [email protected].

The items listed below should all be included in the IMBA-9654 package.

1 x IMBA-9654 single board computer

3 x SATA power cables

6 x SATA cables

2 x Dual RS-232 cable

1 x Single RS-232 cable

1 x I/O shielding

1 x Mini jumper pack

1 x Utility CD

1 x QIG (quick installation guide)

Images of the above items are shown in

Chapter 3

Summary of Contents for IMBA-9654





































































































































































































































































Search results

Summary of Contents for IMBA-9654

Reviews:

IEI Technology IMBA-9654, User Manual, Page: 6 / 260

Search results

Summary of Contents for IMBA-9654

Reviews: