manualshive.com logo in svg

IEI Technology IMBA-9654, User Manual, Page: 144 / 260

Share
Download
IEI Technology IMBA-9654 User Manual Download Page 144

 

 

IMBA-9654 ATX Motherboard

Page 124 

 

UDMA1 

 

Ultra DMA mode 0 selected with a maximum data transfer 

rate of 16.6MBps   

 

UDMA1 

 

Ultra DMA mode 1 selected with a maximum data transfer 

rate of 25MBps   

 

UDMA2 

 

Ultra DMA mode 2 selected with a maximum data transfer 

rate of 33.3MBps 

 

UDMA3 

 

Ultra DMA mode 3 selected with a maximum data transfer 

rate of 44MBps (To use this mode, it is required that an 

80-conductor ATA cable is used.) 

 

UDMA4 

 

Ultra DMA mode 4 selected with a maximum data transfer 

rate of 66.6MBps (To use this mode, it is required that an 

80-conductor ATA cable is used.) 

 

UDMA5 

 

Ultra DMA mode 5 selected with a maximum data transfer 

rate of 99.9MBps (To use this mode, it is required that an 

80-conductor ATA cable is used.) 

 

S.M.A.R.T [Auto] 

Use the 

S.M.A.R.T 

option to auto-detect, disable or enable Self-Monitoring Analysis and 

Reporting Technology (SMART) on the drive on the specified channel. 

S.M.A.R.T

 predicts 

impending drive failures. The 

S.M.A.R.T

 BIOS option enables or disables this function. 

 

Auto D

EFAULT

 

BIOS auto detects HDD SMART support. 

 

Disabled

 

 

 

Prevents BIOS from using the HDD SMART feature. 

 

Enabled 

 

Allows BIOS to use the HDD SMART feature 

 

32Bit Data Transfer [Enabled] 

Use the 

32Bit Data Transfer

 BIOS option to enables or disable 32-bit data transfers. 

Summary of Contents for IMBA-9654





































































































































































































































































Reviews:

No comments