IEI Technology IMBA-9654 User Manual Download Page 51

Page: 51 / 260

IMBA-9654 ATX Motherboard

Page 31

Environment Controller integration. Some of the features of the iTE IT8712F chipset are

listed below:

PC98/99/2001, ACPI and LANDesk Compliant

Enhanced Hardware Monitor

Fan Speed Controller

5V Power Supply

Two 16C550 UARTs for serial port control

One IEEE 1284 Parallel Port

Keyboard Controller

Watchdog Timer

Serial IRQ Support

Vbat & Vcch Support

5V Power Supply

Some of the Super I/O features are described in more detail below:

2.7.2.1 Super I/O LPC Interface

The LPC interface on the Super I/O complies with the Intel

Low Pin Count Specification

Rev. 1.0. The LPC interface supports both LDRQ# and SERIRQ protocols as well as PCI

PME# interfaces.

2.7.2.2 Super I/O 16C550 UARTs

The onboard Super I/O has two integrated 16C550 UARTs that can support the following:

Two standard serial ports (COM1 and COM2)

IrDa 1.0 and ASKIR protocols

Another two chipsets connected to the LPC bus provided connectivity to another two serial

port connectors (COM3 and COM4).

Summary of Contents for IMBA-9654





































































































































































































































































Search results

Summary of Contents for IMBA-9654

Reviews:

IEI Technology IMBA-9654, User Manual, Page: 51 / 260

Search results

Summary of Contents for IMBA-9654

Reviews: