IEI Technology IMBA-9654 User Manual Download Page 139

Page: 139 / 260

IMBA-9654 ATX Motherboard

Page 119

RAID

SATA 1 is configured as an RAID element

AHCI

SATA 1 is configured as an AHCI device

SATA#2 Compatible

Use the

SATA#2 Compatible

BIOS option to select the configuration mode or disable the

SATA 2 drive.

Disabled

SATA 1 drive is disabled

Enhanced

(Default)

SATA 1 drive is in enhanced mode

IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the

IDE Configuration

menu:

Primary IDE Master

Primary IDE Slave

Secondary IDE Master

Secondary IDE Slave

The

IDE Configuration

menu (

BIOS Menu 4

) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section 6.3.2.1

appear.

6.3.2.1 IDE Master, IDE Slave

Use the

IDE Master

and

IDE Slave

configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

Summary of Contents for IMBA-9654





































































































































































































































































Search results

Summary of Contents for IMBA-9654

Reviews:

IEI Technology IMBA-9654, User Manual, Page: 139 / 260

Search results

Summary of Contents for IMBA-9654

Reviews: