IEI Technology IMB-Q354, User Manual

Page: 70 / 216

IMB-Q354 microATX Motherboard
Page 70
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in Table 4-2 .
Clear CMOS Description
Short 1 - 2 Keep CMOS Setup Default
Short 2 - 3 Clear CMOS Setup
Table 4-2: Clear CMOS Jumper Settings
The location of the clear CMOS jumper is shown in Figure 4-9 below.
Figure 4-9: Clear CMOS Jumper
4.5.2 COM Port Pin 9 Setting Jumpers
Jumper Label:
J_COM_F2 , J_COM_F3 and J_COM_F4
Jumper Type:
3-pin header
Jumper Settings:
See Table 4-3
Jumper Location:
See Figure 4-10
The COM Port Pin 9 Setting jumpers configure pin 9 on COM 2/COM 3/COM 4 as either a
+5V, +12V power source (see Section 4.5.3 to setup) or as a ring-in (RI) line. The COM
Port Pin 9 Setting jumpers selection options are shown in Table 4-3 .