IEI Technology IMB-Q354 User Manual Download Page 130

Page: 130 / 216

IMB-Q354 microATX Motherboard

Page 130

Discard Changes and Exit

Use the

Discard Changes and Exit

option to exit the BIOS configuration setup program

without saving the changes made to the system.

Discard Changes

Use the

Discard Changes

option to discard the changes and remain in the BIOS

configuration setup program.

Load Optimal Defaults

Use the

Load Optimal Defaults

option to load the optimal default values for each of the

parameters on the Setup menus.

F9 key can be used for this operation.

Load Failsafe Defaults

Use the

Load Failsafe Defaults

option to load failsafe default values for each of the

parameters on the Setup menus.

F8 key can be used for this operation.

Summary of Contents for IMB-Q354

























































































































































































































Search results

Summary of Contents for IMB-Q354

Reviews:

Related manuals for IMB-Q354

Brands by name

Popular brands

IEI Technology IMB-Q354, User Manual

Search results

Summary of Contents for IMB-Q354

Reviews:

Related manuals for IMB-Q354

Brands by name

Popular brands