IEI Technology IMB-Q354 User Manual Download Page 197

Page: 197 / 216

IMB-Q354 microATX Motherboard

Page 197

NOTE:

The compatible items described here have been tested by the IEI R&D

team and found to be compatible with the IMB-Q354.

E.1 Compatible Operating Systems

The following operating systems have been successfully run on the IMB-Q354.

Microsoft Windows XP (SP2)

Fedora

Core

E.2 Compatible Processors

The following Intel® LGA775 processors have been successfully tested on the IMB-Q354.

CPU

Model Number

Frequency

FSB

65nm Intel® Core™ 2 Duo

E6850

3.0 GHz

1333 MHz

65nm Intel® Core™ 2 Duo

E6750

2.66 GHz

1333 MHz

E.3 Compatible Memory Modules

NOTE:

The memory modules listed below have been tested on the IMB-Q354

other memory modules that comply with the specifications may also

work on the IMB-Q354 but have not been tested.

Summary of Contents for IMB-Q354

























































































































































































































Search results

Summary of Contents for IMB-Q354

Reviews:

Related manuals for IMB-Q354

Brands by name

Popular brands

IEI Technology IMB-Q354, User Manual

Search results

Summary of Contents for IMB-Q354

Reviews:

Related manuals for IMB-Q354

Brands by name

Popular brands