IEI Technology IceCare-10W series User Manual Download Page 41

Page: 41 / 107

ICECARE-10W Mobile Sales Assistant

Page 29

NOTE:

If no beep sound, please check if the “rtkhdaud.dat” file is in

C:\windows\system32\drivers

3.6 Using Magnetic Stripe Reader

Some models of the ICECARE-10W Series have a magnetic stripe reader (MSR) on the

left panel. To test the magnetic stripe reader, follow the steps below.

Step 1:

Check which COM port is used for the MSR connection

. Right click

“

Computer

” from the start menu and select “

Manage

” (

Figure 3-24

). The

Computer Management window appears. Select “

Device Manager

” from the left

panel and look for the COM port information on the right panel.

Summary of Contents for IceCare-10W series












































































































Search results

Summary of Contents for IceCare-10W series

Reviews:

Related manuals for IceCare-10W series

Brands by name

Popular brands

IEI Technology IceCare-10W series, User Manual

Search results

Summary of Contents for IceCare-10W series

Reviews:

Related manuals for IceCare-10W series

Brands by name

Popular brands