IEI Technology HTDB-100F, User Manual

Page: 51 / 88

Handheld Barcode Reader
Page 41
4.1.9 Automatically Adjusting the Barcode Reader to Read Barcodes on a
Mobile Phone
4.1.9.1 Disabling to Read Barcodes on a Mobile Phone
If the user doesn’t need to use the barcode reader to read barcodes on a mobile phone/tablet,
please remember to scan below barcode to disable this function.
(Disable to Read Barcodes on a Mobile Phone)
4.1.9.2 Enabling to Read Barcodes on a Mobile Phone
If the user needs to use the barcode reader to read barcodes on a mobile phone/tablet, please
scan below barcode to enable this function.
(Enable to Read Barcodes on a Mobile Phone)
This function can be effective only when the exposure settings are set to automatic mode (refer to
Section 4.1.3 ). If the exposure settings are set to manual mode, the barcode reader cannot
proceed with automatic adjustment.
After enabling this function, the first time when reading a barcode on a mobile phone, the barcode
reader will fine-tune its settings. Therefore, the decode time will be increased slightly.