IEI Technology FLEX-BX200AI, User Manual

Page: 40 / 131

FLEX-BX200AI
Page 24
Step 6: Re-install the top cover and secure it with the six retention screws previously
removed.
3.9 Mounting the System
The following sections describe the mounting methods supported by the FLEX-BX200AI.
3.9.1 Wall Mount
To mount the box PC onto a wall or some other surface using the two mounting brackets,
please follow the steps below.
Step 1: Turn the box PC over.
Step 2: Align the two retention screw holes in each bracket with the retention screw
holes on the sides of the bottom surface.
Step 3: Secure the brackets to the system by inserting two retention screws (M4*6) into
each bracket ( Figure 3-15 ).
Figure 3-15: Mounting Bracket Retention Screws
Step 4: Drill holes in the intended installation surface according to the bracket
dimensions listed below.