IEI Technology FLEX-BX200AI, User Manual

Page: 30 / 131

FLEX-BX200AI
Page 14
may only be carried out by qualified personnel who are familiar with the
associated dangers.
 Air Circulation : Make sure there is sufficient air circulation when installing
the FLEX-BX200AI. The FLEX-BX200AI’s cooling vents must not be
obstructed by any objects. Blocking the vents can cause overheating of the
FLEX-BX200AI. Leave at least 5 cm of clearance around the FLEX-BX200AI
to prevent overheating.
 Grounding : The FLEX-BX200AI should be properly grounded. The voltage
feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the FLEX-BX200AI.
3.3 Installation Procedure
To properly install the FLEX-BX200AI, the following steps must be followed. Detailed
descriptions of these instructions are listed in the sections that follow.
Step 1: Unpacking the FLEX-BX200AI box PC
Step 2: Install SATA SSD
Step 3: Install M.2 SSD (optional)
Step 4: Install expansion cards (optional)
Step 5: Mount the FLEX-BX200AI
Step 6: Connect the peripheral devices
Step 7:
Power the system up
Step 0: