IEI Technology ECW-281B-BTi, User Manual

Page: 94 / 135

ECW-281B-BTi Embedded System
Page 80
5.3.1 SO-DIMM Replacement
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the ECW-281B-BTi. Please make sure the purchased SO-DIMM
complies with the memory specifications of the ECW-281B-BTi.
To replace a SO-DIMM memory module into a SO-DIMM socket, please follow the steps
below.
Step 1: Remove the bottom surface panel.
Place the ECW-281B-BTi on an anti-static
pad with the bottom panel facing up and the bottom surface removed (see
Section
865
3.4
).
Step 2: Locate the SO-DIMM
on the motherboard.
Figure 5-1: SO-DIMM Location
Step 3: Remove the SO-DIMM
by releasing the arms on the SO-DIMM socket.
Step 4: Align the new SO-DIMM with the socket
. The SO-DIMM must be oriented in
such a way that the notch in the middle of the SO-DIMM must be aligned with
the plastic bridge in the socket (
866
Figure 5-2
).