IEI Technology ECW-281B-BTi User Manual Download

Page: 77 / 135

ECW-281B-BTi Embedded System

Page 63



Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support. Normally if this option is not enabled, any attached USB mouse or USB keyboard

does not become available until a USB compatible operating system is fully booted with all

USB drivers loaded. When this option is enabled, any attached USB mouse or USB

keyboard can control the system even when there is no USB driver loaded onto the

system.



Enabled D

EFAULT

Legacy USB support enabled



Disabled

Legacy USB support disabled



Auto

Legacy USB support disabled if no USB devices are

connected

4.4 Chipset

Use the

Chipset

menu (

BIOS Menu 15

) to access the North Bridge and South Bridge

configuration menus.

WARNING!

Setting the wrong values for the Chipset BIOS selections in the Chipset

BIOS menu may cause the system to malfunction.

Summary of Contents for ECW-281B-BTi








































































































































Search results

Summary of Contents for ECW-281B-BTi

Reviews:

Related manuals for ECW-281B-BTi

Brands by name

Popular brands

IEI Technology ECW-281B-BTi, User Manual

Search results

Summary of Contents for ECW-281B-BTi

Reviews:

Related manuals for ECW-281B-BTi

Brands by name

Popular brands