IEI Technology ECW-281B-BTi, User Manual

Page: 36 / 135

ECW-281B-BTi Embedded System
Page 22
Step 4:
Align the retention screw holes in the HDD with those in both sides of the
bracket.
Step 5:
Secure the HDD with the bracket by inserting four retention screws (M3*4) into
the sides of the bracket (
765
Figure 3-5
).
Figure 3-5: HDD Retention Screws
Step 6:
Replace the HDD bracket onto the bottom surface by inserting the four retention
screw holes in the HDD bracket to the four standoffs on the back of the bottom
surface.
Step 7:
Reinsert the four previously removed retention screws.