IEI Technology ECW-281B-BTi, User Manual

Page: 51 / 135

ECW-281B-BTi Embedded System
Page 37
3.14.3 Power-on Procedure
To power-on the ECW-281B-BTi please follow the steps below:
Step 1:
Connect the power source to the power input jack or the power input terminal
block.
Step 2:
Push the power button (
Figure 3-26
).
Step 3:
Once turned on, the power button should turns to blue.
Step 0:
Figure 3-26: Power Button
3.15 Driver Installation
NOTE:
The content of the CD may vary throughout the life cycle of the product
and is subject to change without prior notice. Visit the IEI website or
contact technical support for the latest updates.
All the drivers for the ECW-281B-BTi are on the utility CD that came with the system. The
utility CD contains drivers for Windows 7 and Windows 8 operating systems. Please select
the corresponding drivers for the system.
The following drivers can be installed on the
Windows 7
operating system:
 Chipset
 I/O driver