IEI Technology ECN-581A-QM57, User Manual

Page: 29 / 109

ECN-581A-QM57 Multimedia Box
Page 20
3.4.2 AT/ATX Power Select Jumper Settings
Jumper Label:
J_ATXCTL1
Jumper Type: 3-pin header (1x3)
Jumper Settings:
See
Table 3-3
Jumper Location: See
Figure 3-9
The AT/ATX Power Select jumper specifies the systems power mode as AT or ATX.
AT/ATX Power Select jumper settings are shown in
Table 3-3
.
AT Power Select Description
Short 1 - 2 Use ATX power
Short 2 – 3 Use AT power Default
Table 3-3: AT/ATX Power Select Jumper Settings
The location of the AT/ATX Power Select jumper is shown in
Figure 3-9
below.
Figure 3-9: AT/ATX Power Select Jumper Location
3.4.3 Clear CMOS Jumper
Jumper Label:
J_CMOS1
Jumper Type: 3-pin header (1x3)
Jumper Settings: See
3
Table 3-4
Jumper Location: See
3
Figure 3-10