IEI Technology ECN-581A-QM57, User Manual

Page: 21 / 109

ECN-581A-QM57 Multimedia Box
Page 12
3.1 Installation Precautions
During installation, be aware of the precautions below:
ƒ
Read the user manual
: The user manual provides a complete description of
the ECN-581A-QM57, installation instructions and configuration options.
ƒ
DANGER! Disconnect Power
: Power to the ECN-581A-QM57 must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the ECN-581A-QM57 is opened while the power cord is still
connected to an electrical outlet.
ƒ
Qualified Personnel
: The ECN-581A-QM57 must be installed and operated
only by trained and qualified personnel. Maintenance, upgrades, or repairs
may only be carried out by qualified personnel who are familiar with the
associated dangers.
ƒ
Grounding
: The ECN-581A-QM57 should be properly grounded. The voltage
feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the ECN-581A-QM57.
3.2 Hard Disk Drive (HDD) Installation
To install the hard drive, please follow the steps below:
Step 1:
Remove the top and front panels by removing four retention screws from the top
panel, one from the right side, two from the bottom panel and four from the left
side panel as shown in
Figure 3-1
.