IEI Technology ECK-3692, User Manual

Page: 137 / 170

ECK-3692G Embedded System
Page 121
Step 7:
Remove the power module.
Step 0:
7.4.5.2 Power Module Installation
To install the new power module, please follow the steps below.
Step 1:
Install the new power module into the embedded system.
Step 2:
Reinsert the four, previously removed power module retention screws
(
Figure 7-12
).
Step 3:
Reconnect the following cable connectors (
Figure 7-12
):
ATX power connector
Power input connector
Power output connector
Step 4:
Replace the top cover.
Step 5:
Remount the embedded system.
Step 6:
Reconnect the power cable to either the terminal block or +12V socket.
Step 7:
Power up the embedded system.
Step 0: