IEI Technology ECK-3692 Page 70 User Manual Download

Page: 70 / 170

ECK-3692G Embedded System

Page 54

BIOS Menu 5: IDE Master and IDE Slave Configuration

Type [Auto]

Use the

Type

BIOS option select the type of device the AMIBIOS attempts to boot from

after the Power-On Self-Test (POST) is complete.

Not Installed

BIOS is prevented from searching for an IDE disk

drive on the specified channel.

Auto D

EFAULT

The BIOS auto detects the IDE disk drive type

attached to the specified channel. This setting should

be used if an IDE hard disk drive is attached to the

specified channel.

CD/DVD

The CD/DVD option specifies that an IDE CD-ROM

drive is attached to the specified IDE channel. The

BIOS does not attempt to search for other types of

Summary of Contents for ECK-3692











































































































































































Search results

Summary of Contents for ECK-3692

Reviews:

Related manuals for ECK-3692

Brands by name

Popular brands

IEI Technology ECK-3692, User Manual

Search results

Summary of Contents for ECK-3692

Reviews:

Related manuals for ECK-3692

Brands by name

Popular brands