IEI Technology AFOLUX 915A Series User Manual Download Page 89

Page: 89 / 155

AFOLUX 915 Series Flat Panel PC

Page 75

channels are separated. This mode supports up to 6

storage devices. Some legacy OS do not support this

mode.

Legacy IDE Channels [SATA Pri, PATA Sec]

SATA Only

Only the SATA drives are enabled.

SATA Pri,

PATA Sec

EFAULT

The IDE drives are enabled on the Primary IDE

channel. The SATA drives are enabled on the

Secondary IDE channel.

PATA Only

The IDE drives are enabled on the primary and

secondary IDE channels. SATA drives are disabled.

IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the

IDE Configuration

menu:

Primary IDE Master

Primary IDE Slave

Secondary IDE Master

Secondary IDE Slave

The

IDE Configuration

menu allows changes to the configurations for the IDE devices

installed in the system. If an IDE device is detected, and one of the above listed four BIOS

configuration options are selected, the IDE configuration options shown in

Section 5.3.2.1

appear.

5.3.2.1 IDE Master, IDE Slave

Use the

IDE Master

and

IDE Slave

configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

Summary of Contents for AFOLUX 915A Series




























































































































































Search results

Summary of Contents for AFOLUX 915A Series

Reviews:

Related manuals for AFOLUX 915A Series

Brands by name

Popular brands

IEI Technology AFOLUX 915A Series, User Manual

Search results

Summary of Contents for AFOLUX 915A Series

Reviews:

Related manuals for AFOLUX 915A Series

Brands by name

Popular brands