IEI Technology AFOLUX 915A Series, User Manual

Page: 67 / 155

AFOLUX 915 Series Flat Panel PC
Page 53
Step 3: Insert the LAN cable RJ-45 connector.
Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector.
Step 0:
3.10.2 Serial Device Connection
The AFL-915 Series has two single female DB-9 connectors on the bottom panel for a
serial device. Follow the steps below to connect a serial device to the AFL-915 Series
panel PC.
Step 1: Locate the DB-9 connector
. The location of the DB-9 connector is shown in
Chapter 2
.
Step 2: Insert the serial connector
. Insert the DB-9 connector of a serial device into
the DB-9 connector on the bottom panel. See
Figure 3-23
.
Figure 3-23: Serial Device Connector
Step 3: Secure the connector
. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0: