IEI Technology AFOLUX 915A Series, User Manual

Page: 54 / 155

AFOLUX 915 Series Flat Panel PC
Page 40
Figure 3-9: Hard Drive Retention Screws
Step 10:
Replace the aluminum back cover to the chassis.
Step 11:
Replace the plastic back cover.
Step 0:
3.8 AT/ATX Mode Selection
AT and ATX power modes can both be used on the AFL-915 series. The selection is made
through an AT/ATX switch on the aluminum chassis inside the plastic back cover (
Figure
3-10
). To select AT mode or ATX mode, follow the steps below.
Step 1:
Remove the plastic back cover. See
Section 3.5
above.
Step 2:
Locate the AT/ATX switch at the bottom right on the aluminum chassis (
Figure
3-10
).