AFL3-W10A/12A/W15A-BT Panel PC
Page 41
Figure 3-24: Rack/Cabinet Bracket Installation
Step 2:
Insert a M5*50 screw into the screw hole on the side of the rack mounting
bracket. Then, install the following components onto the screw in sequence.
See
Figure 3-22
.
Sequence Item
Photo
Instruction
1 Spring
Install a spring onto the screw.
2 Nut
Tighten a nut until the spring is
compressed enough for plastic cap.
3 Plastic
cap
Tighten a plastic cap onto the end of
screw thread.
Step 3:
Repeat
Step 4
to install the other three screws into the sides of the two rack
mounting brackets.
