AFL3-W10A/12A/W15A-BT Panel PC
Page 37
3.12.2 Panel Mounting
To mount the AFL3-W10A/12A/W15A-BT flat bezel panel PC into a panel, please follow
the steps below.
Step 1:
Select the position on the panel to mount the panel PC.
Step 2:
Cut out a section corresponding to the size shown below. The size must be
smaller then the outer edge.
Figure 3-19: AFL-W10A-BT Cutout Dimensions
Figure 3-20: AFL-12A-BT Cutout Dimensions
