manualshive.com logo in svg

IEI Technology AFL2-12A-D525 Series, User Manual

Share
Download
IEI Technology AFL2-12A-D525 Series User Manual Download Page 56

 

 

AFL2-12A-D525 Series Panel PC

Page 56 

Step 4: 

Slide the flat bezel panel PC with the attached rack/cabinet bracket into a rack or 

cabinet (

Figure 4-17

).  

 

Figure 4-17: Install into a Rack/Cabinet 

Step 5: 

Once the flat bezel panel PC with the attached rack/cabinet bracket has been 

properly inserted into the rack or cabinet, secure the front of the rack/cabinet 

bracket to the front of the rack or cabinet (

Figure 4-17

).

Step 0:

 

4.10 Bottom Panel Connectors 

4.10.1 LAN Connection   

There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection 

to an external network. To connect a LAN cable with an RJ-45 connector, please follow 

the instructions below. 

Step 1: 

Locate the RJ-45 connectors

 on the bottom panel of the AFL2-12A-D525. 

Step 2: 

Align the connectors. 

Align the RJ-45 connector on the LAN cable with one of 

the RJ-45 connectors on the bottom panel of the AFL2-12A-D525. See 

Figure 

4-18

. 

Summary of Contents for AFL2-12A-D525 Series





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands