manualshive.com logo in svg

IEI Technology AFL2-12A-D525 Series, User Manual

Share
Download
IEI Technology AFL2-12A-D525 Series User Manual Download Page 158

 

 

AFL2-12A-D525 Series Panel PC

Page 158 

C.5 Recovery Tool Functions 

After completing the initial setup procedures as described above, users can access the 

recovery tool by pressing <

F3

> while booting up the system. However, if the setup 

procedure in Section C.3 has been completed and the auto recovery function is enabled, 

the system will automatically restore from the factory default image without pressing the 

F3 key. The recovery tool main menu is shown below. 

Figure C-33: Recovery Tool Main Menu 

The recovery tool has several functions including: 

1. 

Factory Restore

: Restore the factory default image (iei.GHO) created in 

Section C.2.5. 

2. 

Backup system

: Create a system backup image (iei_user.GHO) which will be 

saved in the hidden partition. 

3. 

Restore your last backup

: Restore the last system backup image 

4. 

Manual

: Enter the Symantec Ghost window to configure manually. 

5. 

Quit

: Exit the recovery tool and restart the system. 

 WARNING: 

Please do not turn off the system power during the process of system 

recovery or backup.   

 

Summary of Contents for AFL2-12A-D525 Series





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands