IEI Technology AFL2-12A-D525 Series User Manual Download Page 169

Page: 169 / 180

AFL2-12A-D525 Series Panel PC

Page 169

Step 20:

Continue to configure the

Boot Option Priorities

BIOS option of the client

system:

Boot Option #1



remain the default setting to boot from the original OS.

Boot Option #2



select the boot from LAN option.

Step 21:

Save changes and exit BIOS menu.

Exit



Save Changes and Exit

Step 22:

Install the auto recovery utility into the system by double clicking the

Utility/AUTORECOVERY-SETUP.exe

in the One Key Recovery CD. This utility

MUST be installed in the system, otherwise, the system will automatically

restore from the factory default image every ten (10) minutes.

Step 23:

Restart the client system from LAN. If the system encounters a Blue Screen of

Death (BSoD) or a hang for around 10 minutes, it will automatically restore from

the factory default image. The following screens will show when the system

starts auto recovering.

Summary of Contents for AFL2-12A-D525 Series





















































































































































































Search results

Summary of Contents for AFL2-12A-D525 Series

Reviews:

Brands by name

Popular brands

IEI Technology AFL2-12A-D525 Series, User Manual

Search results

Summary of Contents for AFL2-12A-D525 Series

Reviews:

Brands by name

Popular brands