IEI Technology AFL-W15A-N270, User Manual

Page: 83 / 126

AFL-W19A/17D/W15A-N270 Panel PC
Page 72
Î
Emulation Type [Auto]
Use the
Emulation Type
BIOS option to specify the type of emulation BIOS has to
provide for the USB device.
Î
Auto D
EFAULT
BIOS auto-detects the current USB.
Î
Floppy
The USB device will be emulated as a floppy drive.
The device can be either A: or B: responding to
INT13h calls that return DL = 0 or DL = 1
respectively.
Î
Forced FDD
Allows a hard disk image to be connected as a
floppy image. This option works only for drives
formatted with FAT12, FAT16 or FAT32.
Î
Hard Disk
Allows the USB device to be emulated as hard disk
responding to INT13h calls that return DL values of
80h or above.
Î
CDROM
Assumes the CD-ROM is formatted as bootable
media. All the devices that support block sizes
greater than 512 bytes can only be booted using this
option.
3.4 PCI/PnP
Use the
PCI/PnP
menu (BIOS Menu 14) to configure advanced PCI and PnP settings.
WARNING!
Setting wrong values for the BIOS selections in the PCIPnP BIOS
menu may cause the system to malfunction.