IEI Technology AFL-W15A-N270, User Manual

Page: 65 / 126

AFL-W19A/17D/W15A-N270 Panel PC
Page 54
Î
UDMA1
Ultra DMA mode 1 selected with a maximum data transfer
rate of 25 MB/s
Î
UDMA2
Ultra DMA mode 2 selected with a maximum data transfer
rate of 33.3 MB/s
Î
UDMA3
Ultra DMA mode 3 selected with a maximum data transfer
rate of 44 MB/s (To use this mode, it is required that an
80-conductor ATA cable is used.)
Î
UDMA4
Ultra DMA mode 4 selected with a maximum data transfer
rate of 66.6 MB/s (To use this mode, it is required that an
80-conductor ATA cable is used.)
Î
UDMA5
Ultra DMA mode 5 selected with a maximum data transfer
rate of 99.9 MB/s (To use this mode, it is required that an
80-conductor ATA cable is used.)
Î
S.M.A.R.T [Auto]
Use the
S.M.A.R.T
option to auto-detect, disable or enable Self-Monitoring Analysis and
Reporting Technology (SMART) on the drive on the specified channel.
S.M.A.R.T
predicts
impending drive failures. The
S.M.A.R.T
BIOS option enables or disables this function.
Î
Auto D
EFAULT
BIOS auto detects HDD SMART support.
Î
Disabled
Prevents BIOS from using the HDD SMART feature.
Î
Enabled
Allows BIOS to use the HDD SMART feature
Î
32Bit Data Transfer [Enabled]
Use the
32Bit Data Transfer
BIOS option to enables or disable 32-bit data transfers.
Î
Disabled
Prevents the BIOS from using 32-bit data transfers.
Î
Enabled D
EFAULT
Allows BIOS to use 32-bit data transfers on supported
hard disk drives.