IEI Technology AFL-ATOM Series, User Manual

Page: 102 / 170

AFOLUX AFL-ATOM Series Panel PC
Page 87
Serial Port Number [COM1]
Use the
Serial Port Number
option allows to select the serial port used for remote
access.
COM1 D
EFAULT
System is remotely accessed through COM1
COM2
System is remotely accessed through COM2
COM3
System is remotely accessed through COM3
NOTE
: Make sure the selected COM port is enabled through the Super I/O configuration
menu.
Base Address, IRQ [3F8h,4]
The
Base Address, IRQ
option cannot be configured and only shows the interrupt
address of the serial port listed above.
Serial Port Mode [115200 8,n,1]
Use the
Serial Port Mode
option to select baud rate through which the console redirection
is made. The following configuration options are available
115200 8,n,1
D
EFAULT
57600 8,n,1
38400 8,n,1
19200 8,n,1
09600 8,n,1
NOTE:
Identical baud rate setting musts be set on the host (a management
computer running a terminal software) and the slave
Redirection After BIOS POST [Always]
Use the
Redirection After BIOS POST
option to specify when console redirection should
occur.