manualshive.com logo in svg

IEI Technology AFL-ATOM Series, User Manual

Share
Download
IEI Technology AFL-ATOM Series User Manual Download Page 99

 

 

AFOLUX AFL-ATOM Series Panel PC

Page 84 

 

Power Off 

 

The system remains turned off 

 

Power On 

 

The system turns on 

 

Last State 

D

EFAULT

 

The system returns to its previous state. If it was on, it 

turns itself on. If it was off, it remains off. 

 

Power Button Mode [On/Off] 

Use the 

Power Button Mode

 BIOS to specify how the power button functions. 

 

On/Off D

EFAULT

 

When the power button is pressed the system is either 

turned on or off 

 

Suspend 

 

When the power button is pressed the system goes into 

suspend mode 

 

Resume on Keyboard/Mouse [Disabled] 

Use the 

Resume on Keyboard/Mouse

 BIOS option to enable activity on either the 

keyboard or mouse to rouse the system from a suspend or standby state. That is, the 

system is roused when the mouse is moved or a button on the keyboard is pressed.   

 

Disabled D

EFAULT

 

Wake event not generated by activity on the 

keyboard or mouse 

 

Resume On 

KeyBoard 

 

Wake event not generated by activity on the 

keyboard 

 

Resume On 

Mouse 

 

Wake event not generated by activity on the 

mouse 

 

Enabled 

 

Wake event generated by activity on the 

keyboard or mouse 

 

Resume on Ring [Disabled] 

Use the 

Resume on Ring

 BIOS option to enable activity on the RI (ring in) modem line to 

rouse the system from a suspend or standby state. That is, the system will be roused by 

an incoming call on a modem.   

Summary of Contents for AFL-ATOM Series











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands