manualshive.com logo in svg

IEI Technology AFL-***-9103, User Manual, Page: 137 / 203

Share
Download
IEI Technology AFL-***-9103 User Manual Download Page 137

 

 

AFL-xxx-9103 Panel PC 

Page 119

6.1 Available Software Drivers 

 NOTE: 

The content of the CD may vary throughout the life cycle of the product 

and is subject to change without prior notice. Visit the IEI website or 

contact technical support for the latest updates. 

The following drivers can be installed on the system: 

 

6.3 Chipset Driver .................................................................................. 120

 

 

6.4 Graphics Driver ................................................................................ 124

 

 

6.5 Gigabit Ethernet Driver .................................................................... 128

 

 

6.6 Audio Driver...................................................................................... 130

 

 

6.7 Touch Panel Driver........................................................................... 133

 

 

6.8 Wireless LAN PCIe Mini Card Driver ............................................... 136

 

 

6.9 Bluetooth Driver ............................................................................... 144

 

Installation instructions are given below. 

6.2 Driver CD Auto-run 

All the drivers for the AFL-xxx-9103 are on the CD that came with the system. To install 

the drivers, please follow the steps below. 

Step 1: 

Insert the CD into a CD drive connected to the system. 

 NOTE: 

If the system does not initiate the "autorun" program when the CD is 

inserted, click the Start button, select Run, then type E:\autorun.exe 

(where E:\ is the system CD drive) to access the IEI Driver CD main 

menu. 

Summary of Contents for AFL-***-9103












































































































































































































Reviews:

No comments