IEI Technology AFL-***-9103 User Manual Download Page 119

Page: 119 / 203

AFL-xxx-9103 Panel PC

Page 101

IRQ# [Available]

Use the

IRQ#

address to specify what IRQs can be assigned to a particular peripheral

device.

Available

The specified IRQ is available to be used by

PCI/PnP devices

Reserved

The specified IRQ is reserved for use by Legacy ISA

devices

Available IRQ addresses are:

IRQ3 [Reserved]

IRQ4 [Reserved]

IRQ5 [Available]

IRQ7 [Available]

IRQ9 [Available]

IRQ10 [Available]

IRQ 11

[Available]

IRQ 14

[Available]

IRQ 15

[Available]

DMA Channel# [Available]

Use the

DMA Channel#

option to assign a specific DMA channel to a particular PCI/PnP

device.

Available D

EFAULT

The specified DMA is available to be used by

PCI/PnP devices

Reserved

The specified DMA is reserved for use by Legacy

ISA devices

Available DMA Channels are:

DM Channel 0

DM Channel 1

DM Channel 3

Summary of Contents for AFL-***-9103












































































































































































































Search results

Summary of Contents for AFL-***-9103

Reviews:

IEI Technology AFL-***-9103, User Manual, Page: 119 / 203

Search results

Summary of Contents for AFL-***-9103

Reviews: