IEI Technology AFL-***-9103 User Manual Download Page 128

Page: 128 / 203

AFL-xxx-9103 Panel PC

Page 110

5.7.1 Northbridge Configuration

Use the Northbridge Chipset Configuration menu (

BIOS Menu 19

) to check the

Northbridge chipset settings.

BIOS Menu 19: Northbridge Chipset Configuration

The

Northbridge Chipset Configuration

menu has no configurable options. The

Northbridge Chipset configuration menu shows the following Northbridge chipset settings:

Memory Hole [Disabled]

Use the

Memory Hole

option to reserve memory space between 15MB and 16MB for ISA

expansion cards that require a specified area of memory to work properly. If an older ISA

expansion card is used, please refer to the documentation that came with the card to see if

it is necessary to reserve the space.

Disabled D

EFAULT

Memory is not reserved for ISA expansion cards

Summary of Contents for AFL-***-9103












































































































































































































Search results

Summary of Contents for AFL-***-9103

Reviews:

IEI Technology AFL-***-9103, User Manual, Page: 128 / 203

Search results

Summary of Contents for AFL-***-9103

Reviews: