manualshive.com logo in svg

IEI Technology AFL-***-9103, User Manual, Page: 115 / 203

Share
Download
IEI Technology AFL-***-9103 User Manual Download Page 115

 

 

AFL-xxx-9103 Panel PC 

Page 97

 

USB 6 ports 

D

EFAULT

 

Six ports are USB 1.1 compatible 

 

USB 2.0 Ports Enable [Enabled] 

Use the 

USB 2.0 Ports Enable

 BIOS option to enable or disable the USB 2.0 ports   

 

Disabled  

USB 2.0 ports disabled 

 

Enabled D

EFAULT

 

USB 2.0 ports enabled 

 

Legacy USB Support [Enabled] 

Use the 

Legacy USB Support

 BIOS option to enable USB mouse and USB keyboard 

support.  

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not 

become available until a USB compatible operating system is fully booted with all USB 

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard 

can control the system even when there is no USB driver loaded onto the system.   

 

Disabled  

Legacy USB support disabled 

 

Enabled D

EFAULT

 

Legacy USB support enabled 

 

Auto  

Legacy USB support disabled if no USB devices are 

connected 

 

USB2.0 Controller Mode [HiSpeed] 

Use the 

USB2.0 Controller Mode

 option to set the speed of the USB2.0 controller.   

 

FullSpeed  

The controller is capable of operating at 12 Mb/s 

 

HiSpeed D

EFAULT

 

The controller is capable of operating at 480 Mb/s 

Summary of Contents for AFL-***-9103












































































































































































































Reviews:

No comments