IEI Technology ACT-412A-N270, User Manual

Page: 62 / 133

ACT-412A-N270 User Manual
Page 62
Step 12:
Click the
Execute
button to execute the command through the selected serial
port (
Figure 3-9
). The raw data of this command shows in the Raw Data area in
the format listed in
Table 3-8
and
Table 3-9
.
Step 12:
Figure 3-9: Get Mifare Parameter
Field Command End
Digit 2 1
Data RM CR (0x0d)
Table 3-8: Get Mifare Parameter Raw Data Format
Status (2 digits) Block Data END (2 digits)
OK Access mode (1 digit) +
Block (2 digits) + Mode (1 digit)
CR,LF (0x0d,0x0a)
ER Error Code (3 digits) CR,LF (0x0d,0x0a)
Table 3-9: Get Mifare Parameter Response Format
3.5.5 Set RF320 Mode
Formatted: Bullet