IEI Technology ACT-412A-N270, User Manual

Page: 44 / 133

ACT-412A-N270 User Manual
Page 44
Figure 2-16: Attach Foam Tape
Step 15:
Attach the adhesive foam tape to the edge of rear panel of the ACT-412A-N270
(see
Figure 2-16)
. Make sure the adhesive tape does not cover the screw
holes as shown below.
Step 15:
Figure 2-17: Foam Tape Installed
To mount the ACT-412A-N270 panel PC into a wall, please follow the steps below.
Step 16:
Select the position on the wall to mount the flat panel PC.
Step 17:
Cut out a section from the wall that corresponds to the dimensions in
Figure
2-18
. Take care that the wall section that is cut out is no larger than the
suggested cut out size.