IEI Technology ACT-412A-N270, User Manual

Page: 26 / 133

ACT-412A-N270 User Manual
Page 26
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
2.4 Preinstalled Components
The following components are all preinstalled.
Motherboard
TFT LCD screen
DDR2 memory module
Resistive type touch screen
RFID module
Wireless LAN module
Component installation is described in
the following sections.
2.5 Installation and Configuration Steps
The following installation steps must be followed.
Step 1:
Unpack the ACT-412A-N270
Step 2:
Install SATA HDD
Step 3:
Install CF card
Step 4:
Configure the system
Step 5:
Mount the ACT-412A-N270
Step 6:
Connect peripheral devices to the bottom panel of the ACT-412A-N270.
Step 0:
2.6 Rear Panel Removal
To access the CF slot and AT/ATX switch, the back cover must be removed. To remove
the back cover, please follow the steps below.
Step 1:
Place the ACT-412A-N270 face down on a flat surface.
Step 2: Remove the rear panel
. Remove the nine retention screws (
Figure 2-1
) from