27
ACCURA9/9L INSTRUCTION MANUAL
Error messages on the screen as follows.
1.
Shot count-up
This screen appears when shot-count reaches the initial setting shot-count.
********************
* SHOT COUNT
*
* COUNT UP!!
*
********************
Count Up Screen
*** RS232C
* SHOT COUNT
*
* COUNT UP!!
********************
Count Up Screen
2.
Empty Alarm
This screen appears when the material quantity in the barrel or cartridge reaches the initial setting
minimum empty level.
********************
*
* EMPTY DETECTED *
********************
Enpty Detect Screen
*** RS232C
*
* EMPTY DETECTED *
********************
Enpty Detect Screen
3.
RS232C Check Sum Error
This screen appears when there is difference between values of checksum transmitted in
RS232C and of checksum caliculated inside of dispenser
*** RS232C
*
* CHECK SUM ERROR *
********************
Check Sum Error Screen
4.
RS232C Status Error
This screen appears when Parity, Over-run or Framing error occurs during communication..
*** RS232C
*
* STATUS ERROR
*
********************
Status Error Screen