AC-KIT-888HD Audio Module
Page 20
4.3.2 DVDD Power-on Select Jumper
Jumper Label:
J2
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-3
Jumper Location:
See
Figure 4-2
This jumper allows the user to set the DVDD power for the audio module.
Setting
Description
Short 1-2
Select DVDD power by +1.5V
Short 2-3 (Default)
Select DVDD power by +3V
Table 4-3: DVDD Power-on Select Jumper Settings
Figure 4-2: DVDD Power-on Select Jumper Location
4.4 Chassis Installation
Follow the steps below to install the AC-KIT-888HD audio module into a chassis.
Step 1:
Turn off and disconnect the system from all power sources.
Step 2:
Open the chassis to expose the rear panel slots.
Step 3:
Remove the slot cover bracket from an unused slot on the chassis rear panel by
removing its retention screw.
Summary of Contents for AC-KIT-888HD
