June 2018
Translation of the original instructions
Assembly instructions
MAN_EN_1057398_Module115-42(B)_R3b.doc
Module 115/42 (B)
Page 11 of 47
3.3
Attachment
In most use cases, the linear module 115/42 or 115/42 B is attached to a level mounting
surfaced with clamping profiles/clamping elements (see
Figure 5, bottom
). The carriage moves
freely.
The linear module should not be attached otherwise, e.g. by additional bores in the basic unit.
These bores will nearly always lead to clamping of the guide basis and damage to internal
parts of the module.
CAUTION
The clamping surface should have a levelness of 0.1 mm/m².
Figure 5: Attachment with clamping profiles / clamping elements
NOTE
For an overview of the different clamping elements, see the section
Clamping
element
Clamping
element
