1.8KW Router User Manual
10
Brush
down
compensation
After the brush detect material thickness, it will
make down compensation (range 0-12.7mm)
Router
bit
change
fine-tune
Spindle down compensation when change router
bit (to make extra 2mm down)
9.2.
Stick & paper to correction router bit library offset
Preparation
1. Put stick on spindle
2. Cut some 10*40CM paper sheet.
9.3.
Read left coordinate of positioning slot A
Set stick to the central position of slot, make sure it fully touch with each side of
slot except bottom side.
Select step distance “x 1mm”, move the stick approach to left side of slot;
change to step distance”x0.1mm”, put paper between stick and left side of slot,
keep moving stick till paper can’t move up and down, then back 0.1mm,
change to step distance”x0.01mm”, keep moving when paper can’t be move
up and down, read the coordinate.
Read the coordinate and click
9.4.
Read right coordinate of positioning slot A
Set stick to the central position of slot, make sure it fully touch with each
side of slot except bottom side.
Select step distance “x 1mm”, move the stick approach to right side of slot;
change to step distance”x0.1mm”, put paper between stick and right side of
slot, keep moving stick till paper can’t move up and down, then back 0.1mm,
change to step distance”x0.01mm”, keep moving when paper can’t be move
up and down, read the coordinate.
