1.8KW Router User Manual
28
Run in win7 compatibility mode and run as an administrator.
18.5.
The tool library cover is not smooth
Fault: manually turned on and off the tool library, opened and closed, the cover,
there is collision sound or the speed is obviously slow.
Solution: Adjust the protective cover valve.
18.6.
Blade fall in the tool library
Fault: Because it is 6+3 model in the 9 tool holder library, the 6 common tool
holders are smaller than 3 chamfering tool holders, and the normal blade will
fall into the large tool holder.
Solution: Clip the blade with tweezers.
19.Software Update
19.1.
Serial port connection
After updating the software, you need to reconfigure the Cutterserver serial
port.
19.2.
Interface configuration
Configure the single beam and double beam interface (modify the parameters
in the SysConfig configuration file in the Cutterserver directory).
