19
十一. 保養(長期放置)
Maintenance (long-term storage)
1.
各部清洗乾淨後
,
檢查各部位螺絲是否有鬆動
,
漏油
,
損壞
After cleaning all parts, to check if there is any looseness or oil leak or
damages for all parts bolts.
2.
本機易生銹部分
,
在使用後
,
清洗乾淨並必須塗抹防銹油或噴漆以防生
銹
For the easily rusted parts of the machine: after using the machine, should be
clean and wash and daub with the anti-rust oil or spray paint to prevent rust.
3.
將油箱燃料漏乾並將引擎發動至自行熄火為止
(
化油器及油管內均無燃料
)
再將火星塞口處入機油於汽缸內
,
爾後拉引擎起動拉柄
,
使活塞往覆運
動十數次
,
再把火星塞鎖緊
,
並使活塞於汽缸內呈壓縮狀態
Drain away the fuel from the fuel tank and switch on the engine until the
engine stopped (no fuel in carburetor and oil pipe )and infuse the engine oil
into the cylinder from the spark plug cap and then pull the engine start handle
to move the piston back and forth for more than ten times , then lock the
spark plug to make the piston stay in compression condition in the cylinder.
