16
5.
中耕或培土作業方式
:
將耕耘部裝上中耕刀
,
或培土刀
,
必須注意耕刀回旋
方向
(
請參照三
.
安裝步驟
: 7
和
8
圖
) ,
將耕耘覆蓋
,
側蓋
,
塑膠擋泥板掀起
,
依需要作落土點之調整
, 先裝上中耕刀將土翻鬆 , 拆下中耕刀裝上培土刀及培
土鐵輪 , 即可進行培土作業 , 若需要作單邊培土作業 , 請將
左
邊培土刀拆下裝
上單邊培土刀(刀架為紅色) ,
右
邊培土刀不必拆 , 使土噴向
右
邊 ,操作時人站在
把手方向 , 引擎在前面 , 請參照下圖 :
How to tillage or banking up: Install the tillage blade or banking up blade onto the
tillage part, carefully inspect the blade for correct rotating direction (Refer to 3.
Assembly; Fig 7 & 8). Depend on the operation requirement to adjust the open angle
of the rotary cover , side cover and muddy plate. Install the tillage blade first to
loosening the soil, and dissemble the tillage blade then install the banking up blade
and wheel for banking up operation. If just need to bank up single side, please
remove the left side of banking blade first, then load single banking blade(the rotary
coclor is red), keep the right side of blade to make the soil moving to right side.
Operator should stand near the handle, carefully follow the engine, Refer to the
following fig.
