IDW G-Series Instruction Manual Download Page 4

Page: 4 / 11

Innovative DisplayWorks, Inc.

Instruction Manual

G-26c/GCG-26c

INSTALLATION

Installation of the cooler must be done according to applicable local codes or equivalent.

Ambient Environment

• Place cooler on an even surface to reduce

vibration and noise.

• To transport, do not tilt the cooler beyond

a 45 degree angle.

• Do not place cooler in direct sunlight or

near any heat sources.

• Do not place cooler in environment

temperatures that exceed 80°F.

• Do not place cooler in below normal

temperatures.

• Do not place cooler in extreme humid

environments, this may cause components

to rust.

• Do not place cooler near constant running

or splattering water, this may cause

immediate damage to refrigeration system.

• Must allow at least 4” between rear of

cooler and wall for proper ventilation and

heat dissipation of cooler.

• Do not place furniture or other articles with

sharp edges near the cooler in order to

prevent damage to the glass door.

• This cooler is for indoor use.
• Place unit in it’s fi nal location, making certain

there is adequate ventilation in the room.

WARNING:

Warranty is void if ventilation

is insuffi cient.

Preparation Prior to Operation

Electrical Requirements

• Remove all packaging materials before

using cooler. This includes: foam pedestal,

adhesive tape (used to fi x accessories) and

protective gaskets.

• Inspect cooler for concealed damage.

Immediately fi le a claim with the freight

carrier if there is damage. IDW is not

responsible for damage incurred during

shipping.

• Cooler must remain unplugged in an

upright position for 1 hour prior to use.

• Clean the interior surface with a soft cloth

and lukewarm water before operation.

• Ensure that drain hose or hoses are

positioned in the pan.

• Remove plug and cord from inside the

lower rear of the cooler.

• The unit should be placed close enough

to the electrical supply so that extension

cords are not used.

• This model operates with a 110-120V/60Hz

power supply. Check the electrical outlet

for proper voltage.

• Dedicate one outlet for the use of the

cooler.

• Do not use an extension cord or any other

multiple connectors as this can lead to

compressor failure.

• If the cord is damaged, it must be replaced.

• For your safety, plug the unit into a

grounded wall outlet. Please check with a

certifi ed electrician for details.

WARNING:

Do not use extension cords.

WARNING:

Compressor warranties are

void if compressor burns out due to low

voltage.

WARNING:

Power cord ground pin must

NOT be removed!

LEVELING

• Set unit in its fi nal location making certain there is adequate

ventilation in the room.

WARNING:

Warranty is void if ventilation is insuffi cient.

• Proper leveling of the cooler is critical to it operating

correctly. Condensation removal and door operation are

both affected by leveling.

• The cooler should be leveled front to back and side to side

with a level.

• Ensure the drain hose or hoses are positioned in the pan.
• Remove the plug and cord from inside the lower rear of the

cooler.

• The unit should be placed close enough to the electrical

supply so that extension cords are never used.

CAUTION FLAMMABLE REFRIGERANT

• DANGER – Risk Of Fire Or Explosion.

Flammable Refrigerant Used. To Be Repaired

Only By Trained Service Personnel. Do Not Puncture Refrigerant Tubing.

• CAUTION – Risk Of Fire Or Explosion.

Flammable Refrigerant Used. Consult Repair

Manual/Owner’s Guide Before Attempting To Install or Service This Product. All Safety

Precautions Must be Followed.

• CAUTION – Risk Of Fire Or Explosion.

Dispose Of Properly In Accordance With

Federal Or Local Regulations. Flammable Refrigerant Used.

• CAUTION – Risk Of Fire Or Explosion

Due To Puncture Of Refrigerant Tubing; Follow

Handling Instructions Carefully. Flammable Refrigerant Used.

• CAREFUL

- Handling, moving and operating of the refrigerator or freezer to avoid

either damaging the refrigerant tubing, or increasing the risk of a leak.

• CAUTION

- Component parts shall be replaced with like components and that

servicing shall be done by factory authorized service personnel, so as to minimize the

risk of possible ignition due to incorrect parts or improper service.

DANGER –

Risk Of Fire Or Explosion. Flammable Refrigerant Used. To Be

Repaired By Trained Service Personnel Only. Do Not Puncture Refrigerant Tubing.

CAUTION –

Risk Of Fire Or Explosion. Flammable Refrigerant Used. Consult

Repair Manual/Owner’s Guide Before Attempting To Service This Product. All

Safety Precautions Must be Followed.

CAUTION –

Risk Of Fire Or Explosion. Dispose Of Property In Accordance With

Federal Or Local Regulations. Flammable Refrigerant Used.

CAUTION –

Risk Of Fire Or Explosion Due To Puncture Of Refrigerant Tubing;

Follow Handling Instructions Carefully. Flammable Refrigerant Used.

CAUTION FLAMMABLE - R600a Refrigerant

DANGER -

Risque d'incendie ou d'explosion. Réfrigérant inﬂammable utilisé.

Pour être réparé que par un personnel de maintenance qualiﬁé. Ne pas percer

réfrigérant Tubing.

ATTENTION -

Risque d'incendie ou d'explosion. Réfrigérant inﬂammable utilisé.

Consultez manuel / guide de l 'utilisateur de réparation avant de tenter de

réparer ce produit. Toutes les précautions de sécurité doivent être respectées.

ATTENTION -

Risque d'incendie ou d'explosion. Aliéner des biens conformé-

ment à la réglementation fédérales ou locales. Réfrigérant inﬂammable utilisé.

ATTENTION -

Risque d'incendie ou une explosion due à la perforation de

tuyaux de réfrigérant; suivre les instructions de manipulation avec précaution.

Réfrigérant inﬂammable utilisé.

PRUDENCE INFLAMMABLE - R600a Réfrigérant

SHELVING INSTALLATION

(Maximum load per shelf is lbs/ kg)

Display refrigerators can be loaded within the shelf dimensions from the front

to back side. They can also be loaded in any space from the bottom to the top