IDVIEW PIV Series User Manual Download Page 67

Page: 67 / 78

-Detected Area Setup

The Detect Area is displayed as follows after selecting this item. The
detection area consists of 273 (21

13) detection grids in NTSC video

format or 336 (21

16) grids in PAL format.

■

■■

■■■■■■■■■■

■

■■■■■■■■■

■■

■

Use the Direction buttons to move the cursor and press ENTER to enable or

disable a grid. Press MODE to select all of the grids for detection; press

MODE again to de-select all of the grids.

Sensitivity

The item is used to set the sensitivity of detection grids for the camera. A

greater value indicates more sensitive motion detection. A motion alarm will

be triggered, once the amount of motion detected exceeds the Threshold

value

Move the cursor to <Sensitivity> and press ENTER, and then use UP / DOWN

buttons to adjust the value. The value is indicated in 4% increment.

Area Threshold

Summary of Contents for PIV Series















































































Search results

Summary of Contents for PIV Series

Reviews:

Brands by name

Popular brands

IDVIEW PIV Series, User Manual

Search results

Summary of Contents for PIV Series

Reviews:

Brands by name

Popular brands