5.6.4.1 Channel Select
The item is used to select a desired channel for setting the parameters.
Move the cursor to <Channel Select> and press ENTER, then select a
channel using UP / DOWN buttons. Press ENTER again to confirm the
setting.
5.6.4.2 Video Loss Detect
This item allows user to enable / disable Video Loss as an alarm event.
Select <ON> to enable Video Loss alarm events, <OFF> to disable. The
default setting is <ON>.
5.6.4.3 Motion Detect
Use to enable or disable the motion detection function of the PIV
TM
Series
MPEG-4 DVR. By default, the value is <OFF>.
If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings.
5.6.4.4 Detection Configuration
If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings.
Select a channel for setting the parameters, move the cursor to <Detection
Config>, and press ENTER. The Detection Configuration menu displays
as follows.
