manualshive.com logo in svg

IDVIEW PIV Series, User Manual

Share
Download
IDVIEW PIV Series User Manual Download Page 57

128> to <127>. The default setting is <0>.  

5.3.10 Hue 

 

Move the cursor to the item and press ENTER for adjusting the hue of the 
camera. Use UP / DOWN buttons to adjust the value.  

 

Record Setup 

 

The following three factors will effect the total record time of PIV

TM 

Series 

MPEG-4 DVR:  

. 

• HDD capacity  

. 

• Recording Rate (Picture per Second)  

. 

• Image quality settings  

 

The greater the recording rate and the higher the quality setting, the 
shorter the recording time. Most of the related factors can be set here in 
this submenu.  

The Record Setup menu allows user to set recording quality, recording 
schedules, and other recording parameters. Administrator's password is 
required to access Record Setup menu. In the Main menu, move the 
cursor to <Record Setup> and press ENTER. The following menu is 
displayed.  

Record Setup  

1. Record Mode  

 

720

×

240@60PPS 

2. Schedule Setup  

 

 

3. Preset Config  

 

Standard  

4. ezRecord Setup  

 

 

5. Circular 
Recording  

 

ON 

6. Purge Data  

 

 

 

5.4.1 Record Mode 

 

The item is for selecting resolution and recording rate. The relative record 
settings, such as preset configuration, will follow the record mode setting. 
The options are <720 

× 

480@30PPS>, <720 

× 

240@60PPS> and <360 

× 

Summary of Contents for PIV Series















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands